Anmol Chemicals is the pioneer manufacturers of Sodium phosphate monobasic dibasic tribasic, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Sodium phosphate monobasic dibasic tribasic made in an ISO9001:2008, ISO22000:2005 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium phosphate monobasic dibasic tribasic is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal
Sodium phosphate monobasic Monosodium Phosphate SDS GHS, MSDS Sheet
Specifications of Monosodium phosphate or Sodium phosphate monobasic manufacturers
Monosodium Phosphate SDS GHS, MSDS Sheet, Monobasic Sodium Phosphate Monobasic Material Safety Data Sheet
1. Product Identification
Synonyms: Sodium biphosphate; Sodium acid phosphate; Sodium dihydrogen phosphate, Mono Sodium Phosphate
CAS No.: 7558-80-7 for Anhydrous & CAS Number, CAS Number 10049-21-5 for Monohydrate & CAS Number 13472-35-0 for Dihydrate.
EINECS EC Number: 231-449-2
Molecular Weight: 119.98 for Anhydrous
Chemical Formula: NaH2 PO4 for Anhydrous and NaH2PO4 · H2O for Monohydrate
Recommended usage: Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Monosodium Phosphate or Mono Sodium Phosphate or Sodium Biphosphate or Sodium Phosphate Monobasic
CAS Number.: 7558-80-7
EINECS EC Number: 231-449-2
Percent: 98 - 100%
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire: Mono Sodium Phosphate is not considered to be a fire hazard.
Explosion: Monosodium Phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire over Mono Sodium Phosphate.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill of Sodium Phosphate Monobasic. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue of Mono Sodium Phosphate may be flushed to sewer with plenty of water.
7. Handling and Storage
Keep Mono Sodium Phosphate in a tightly closed container, stored in a cool, dry, ventilated area. Protect Mono Sodium Phosphate against physical damage. Containers of Sodium Phosphate Monobasic may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established for Monosodium Phosphate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the dust or mist of Monosodium Phosphate is apparent, a half-face dust/mist respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Safety glasses. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Mono Sodium Phosphate is white crystalline powder.
Odor: Monosodium Phosphate is odorless.
Solubility: 59.9 g/100g @ 0C (32F)
Specific Gravity: 2.04 for Mono Sodium Phosphate.
% Volatile by volume @ 21C (70F): 0
Boiling Point: 204C (399F)
10. Stability and Reactivity
Stability: Monobasic Sodium Phosphate is stable under ordinary conditions of use and storage. Slightly hygroscopic.
Hazardous Decomposition Products: Phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur for Monosodium Phosphate.
Incompatibilities: No incompatibility data found.
11. Toxicological Information
Anhydrous: Oral Rat LD50: 8290 mg/kg.
Anhydrous: Oral Rabbit LD50: 7940 mg/kg
When of sufficient purity is classed as GRAS (generally recognised as safe) by FDA (182/6085) in USA.
Carcinogenic Effects: Not a reported carcinogen.
12. Ecological Information
Toxicity to Fish:
Invertebrate: 48 hr. EC50 (saphnia magna): >1000mg/L; practically non-toxic
Warmwater fish: 96 hr LC50 (bluegill sunfish): 6400 mg/L; practically non-toxic
Coldwater fish: 96 hr LC50 (rainbow trout): 3200 mg/L; practically non-toxic
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Mono Sodium Phosphate container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
15. Regulatory Information
USA -TSCA Inventory: 7558-80-7 Anhydrous is listed.
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No; Reactivity: No
SARA 313: Not applicable
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
Clean Water Act: Not applicable
Clean Air Act: Not applicable
OSHA Occupational Safety and Health Administration: Not applicable
CERCLA: Not applicable
California Proposition 65: This product does not contain any Proposition 65 chemicals
Canada - WHMIS - Classifications of Substances: 7558-80-7 Uncontrolled product according to WHMIS classification criteria.
Canada - WHMIS - Ingredient Disclosure List: None Listed
EINECS EC Number: 231-449-2
16. Other Information
Our company provides this Monosodium Phosphate or Monobasic Sodium Phosphate SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Monosodium Phosphate Monobasic Sodium Phosphate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Sodium phosphate monobasic Monosodium Phosphate Manufacturers
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan,etc.
Copyright and Usual Disclaimer is Applicable. 23 March, 2016
Sodium Phosphate monobasic dibasic tribasic Manufacturers